unisonic technologies co., ltd 8156 cmos ic www.unisonic.com.tw 1 of 5 copyright ? 2012 unisonic technologies co., ltd qw-r502-010,d 8 functions x?mas light control ? features * 8 functions * rotary switch select * built in pll, 50/60hz auto detect. dip-18 dip-16 ? ordering information ordering number package packing lead free halogen free 8156l-d16-t 8156g-d16-t dip-16 tube 8156L-D18-T 8156g-d18-t dip-18 tube
8156 cmos ic unisonic technologies co., ltd 2 of 5 www.unisonic.com.tw qw-r502-010,d ? pin configuration dip-16 dip-18 ? mode functions mode functions 1 auto scan mode 2 to mode 7 2 in waves 3 sequential 4 slo-gol 5 chasing / flash 6 slow fade 7 twinkle / flash 8 steady on
8156 cmos ic unisonic technologies co., ltd 3 of 5 www.unisonic.com.tw qw-r502-010,d ? electrical characteristics (@v dd =4v unless otherwise specified) parameter symbol test conditions min. typ. max. unit operating voltage v dd 4 5 v operating current i op no load 2 ma oscillator frequency f osc 30% tol. 250 khz operating temperature t opr. 0 25 60 c
8156 cmos ic unisonic technologies co., ltd 4 of 5 www.unisonic.com.tw qw-r502-010,d ? application diagram t3 t4 t5 t6 t7 t8 t1 t2 ac110v 60hz v dd zc r2 c1 r1 910 1 9 16 + s1 s2 s3 s4 v ss 8 dip-16 ac110v 60hz ac220v 50hz ac24v 50hz r1 82k 180k 200k r2 1m 1m 1m c1 47 /16v 47 /16v 47 /16v 8-step switch t 1 t5 t 2 t3 t4 t6 t7 t 8
8156 cmos ic unisonic technologies co., ltd 5 of 5 www.unisonic.com.tw qw-r502-010,d utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
